C007200

C007200 is an advanced diagnostic trouble code in the BYD Integrated Power Brake (IPB) system — Atto 3

Braking System

C007200 is an advanced diagnostic trouble code in the BYD Integrated Power Brake (IPB) system.

It indicates an abnormal thermal condition or pressure-temperature correlation in hydraulic brake circuit A (typically the front brake circuit).

The system triggers this code based on a combined assessment of real-time master cylinder pressure sensor data, the hydraulic valve body temperature prediction model, and the braking frequency algorithm.

The system records this fault when brake fluid temperature exceeds the preset threshold (typically caused by frequent braking, throttling heat generation from internal hydraulic leakage, or high ambient temperatures), or when the pressure sensor signal logically mismatches the temperature model.

This fault may degrade ESP/ABS functions, cause abnormal brake pedal feel (soft or hard), and restrict regenerative braking.

Severe cases trigger overheat protection and cut off power output.

3
Cases Logged
BYD DTC AI Analysis

Song PLUS DM-i: Software false positive triggers multiple simultaneous DTCs (C007200+C055E00)

The dashboard simultaneously illuminated the ABS, ESP and brake system warning lights, displaying "Check brake system". The scan tool retrieved DTCs C007200 (Brake temperature too high) and C055E00 (Brake hydraulic circuit A leak) among others. Brake fluid level was normal with no visible external leaks, ruling out physical leakage. Performed "Brake hydraulic system bleed" and "Pressure sensor zero calibration" using the dealership diagnostic tool, then reflashed the ESP control unit software. Fault eliminated. Root cause: IPB system pressure sensor zero drift or software logic miscalculation. Resolved without replacing any hardware.
Original source ↗
BYD DTC AI Analysis

BYD Han DM: Internal Leak in Brake Hydraulic Circuit from Aged Seal

While driving, the dashboard suddenly displayed 'Brake System Fault' and ABS/ESP functions failed. DTC C055E00 (Brake Hydraulic Circuit A Leak) stored—same hydraulic circuit monitoring fault category as C007200. Lifted the vehicle and inspected the brake calipers and external lines at all four wheels; found no leaks. Removed the ABS/IPB pump and found the internal valve seals had hardened with age, causing internal brake fluid leakage (not external) within the valve body, abnormal hydraulic circulation, and localized overheating. Replaced the ABS/ESP pump assembly (using improved high-temperature seal components), performed brake bleeding and sensor calibration. Fault resolved.
BYD DTC AI Analysis

Contaminated wheel speed sensor on Tang DM triggered false ESP activation, indirectly causing hydraulic overheating.

While driving at highway speeds, the ESP system triggered erroneously, causing sudden automatic braking and brake pedal shudder. The instrument cluster then displayed a brake system fault. The scan tool showed C0035 (right front wheel speed sensor signal fault), hydraulic circuit pressure anomalies, and C0072-series temperature monitoring faults. Inspection found the right front wheel speed sensor probe covered in iron debris and mud, causing signal fluctuation. This abnormal signal caused the ESP to falsely detect wheel slip, repeatedly adjusting hydraulic circuit pressure, which indirectly overheated the hydraulic valve body and triggered C007200-type temperature monitoring faults. After cleaning the wheel speed sensor probe and tone ring, resetting the IPB system and calibrating the sensors cleared the fault.
Original source ↗
Data confidence: Community This information is for reference only. Always consult a qualified technician for diagnosis and repair. Do not attempt high-voltage system repairs yourself.